lg 47lb671v-zb eax65384003 emmc (1.2) Download LG 47LB671V-ZB EAX65384003 EMMC Download (1.2)

tv model 47LB671V-ZB

POWER BOARD MAIN BOARD

LG 47LB671V-ZB EAX65384003 (1.2) EMMC Download

EAX65384003 (1.2)

LC470DUH PG F1

EMMC BIN THGBMAG5A1JBAIR

pin isp read emmc all

read programmer tnm5000 isp pin

read emmc

read emmc

programmer RT809H read emmc spi pin

ISP-CABLE-EMMC-PIN

Programmer ISP Cable EMMC pin
ISP PIN 1 CMD
ISP PIN 3 RST-n(Reset) (mandatory)
ISP PIN 5 CLK (Clock)
ISP PIN 6 DAT0
ISP PIN 8, 10 VSS (GND)
Vcc of Chip Must be ON. Reset is needed only when circuit reset is not working

Note 1: After Selecting EMMC, programmer will be switched to Report view.
because EMMC files are too large and can’t be viewed by hex editor.
you can switch back to hex editor by unmarking the report button

Note 2: Load & Save buttons has no use in EMMC nand. you must select filename
after pressing read or program buttons. File will be saved automatically with
Boot 1, Boot 2, .RPMB, EXT_CSD extensions for different parts of the chip

Note 3: After pressing read or Program, EMMC size and type will automatically
be Detected

Note 4: Use Config Window for selecting Different Parts of the chip for read and write.
Also, chip Size and name is read from the chip and can be viewed in this window

Note 5: Erase is for total chip erase. before Programming Each part, Programmer
will erase it automatically, so no need for chip erase before program

Note 6: Only First 192 byte of EXT_CSD is writable by users and Some of these bytes
are read-only and some parts are one-time programable so if you write over these areas,
you get Write errorNote 7: in most cases, Reset Pin is not necessary, Power on/off the device for reset.

---

My channel YouTube👉 RepairAllTV

to understand how emmc is programmed, follow us in the video below

---