Forum radio code repair all tv

film forum logo11
Please or Register to create posts and topics.

pins eMMc IC 8800

PreviousPage 2 of 2

main board

EAX67133404(1.0)

Павел , вы не подключили vccq-1,8v

1 ====> CMD

5====> CLK

6====> D0

?=====> VCC

?=====> VCCQ

image

vcc - 3,3v

vccq - 1,8v

TNM5000

vcc - 3,3v ====> on which pin ????

vccq - 1,8v ====> on which pin ???

072703 1

paul

 

 

this programmer TNM5000. there is no voltage output 3.3v even 1.8v you have to do so. get a 5v adapter. also, get 2 regulators voltage a 3.3v and a 1.8v. remove the fuse where it is supplied with voltage main board 3.3v and 1.8v and connect the 3.3v and 1.8v voltages that you made with the adapter and read the EMMC. try without removing the voltage fuse if it fails remove the fuse

Uploaded files:
  • You need to login to have access to uploads.

paul

Uploaded files:
  • You need to login to have access to uploads.

repairalltv.com

I don't understand everything but I will try

thanks again

PreviousPage 2 of 2

in this forum we join together to help each other on how to repair technology with ease. you are welcome. forum repairalltv.com

here please. don’t write where someone posted. if you ask for help, then open a post (+ New Topic) we will reply to you as soon as possible. to respond to someone’s post, do so if you have a solution for this post that has asked for help. you can help. thank you from us Repairalltv

1 you who want to participate in the forum to help you. who needs help. go Subscriptions. like on the picture

you who want to participate in the forum to help you. who needs help. go Subscriptions. like on the picture 1

2 choose where you will participate according to your desire

choose where you will participate according to your desire 2