SAMSUNG UE55D6300SS BN41-01587 emmc SDIN5D2-2G

November 7, 2020
UE55D6300SS
Share post with Friends

samsung ue55d6300ss bn41-01587 EMMC sdin5d2-2g download BN41-01587 emmc SDIN5D2-2G

tv model EU55D6300SS

MAIN BOARD 3

MAIN BOARD

MAIN BOARD BN41 01587

MAIN BOARD BN41-01587

BN94 05318D

BN94-05318D

ISP EMMC PROGRAMMER TNM5000

ISP EMMC PROGRAMMER TNM5000

ISP PIN READ EMMC TNM 5000

ISP PIN READ EMMC TNM 5000

ISP-CABLE-EMMC-PIN

Programmer ISP Cable EMMC pin
ISP PIN 1 CMD
ISP PIN 3 RST-n(Reset) (mandatory)
ISP PIN 5 CLK (Clock)
ISP PIN 6 DAT0
ISP PIN 8, 10 VSS (GND)
Vcc of Chip Must be ON. Reset is needed only when circuit reset is not working

Note 1: After Selecting EMMC, programmer will be switched to Report view.
because EMMC files are too large and can’t be viewed by hex editor.
you can switch back to hex editor by unmarking the report button

Note 2: Load & Save buttons has no use in EMMC nand. you must select filename
after pressing read or program buttons. File will be saved automatically with
.Boot1, .Boot 2, .RPMB, .EXT_CSD extensions for different parts of the chip

Note 3: After pressing read or Program, EMMC size and type will automatically
be Detected

Note 4: Use Config Window for selecting Different Parts of the chip for read and write.
Also, chip Size and name is read from the chip and can be viewed in this window

Note 5: Erase is for total chip erase. before Programming Each part, Programmer
will erase it automatically, so no need for chip erase before program

Note 6: Only First 192 byte of EXT_CSD is writable by users and Some of these bytes
are read-only and some parts are one-time programable so if you write over these areas,
you get Write error

Note 7: in most cases, Reset Pin is not necessary, Power on/off the device for reset

read emmc1 2

read emmc

read emmc 2

read emmc

read emmc 3

read emmc

ISP EMMC PROGRAMMER RT809H

ISP EMMC PROGRAMMER RT809H

PANEL LD550CGC 02

PANEL LD550CGC-02


repairalltv.com