SAMSUNG UE32F4510AW BN41-01958 EMMC KLM4G1FE3B-B001
![SAMSUNG UE32F4510AW EMMC](https://repairalltv.com/wp-content/uploads/2020/11/SAMSUNG-UE32F4510AW-EMMC.png)
samsung ue32f4510aw bn41-01958 emmc klm4g1fe3b-b001 bn94-06779x
TV MODEL UE32F4510AW
![MAIN BOARD POWER BOARD](https://repairalltv.com/wp-content/uploads/2020/11/MAIN-BOARD-POWER-BOARD-300x225.png)
MAIN BOARD POWER BOARD
![MAIN BOARD](https://repairalltv.com/wp-content/uploads/2020/11/MAIN-BOARD-300x225.png)
MAIN BOARD
![MAIN BOARD BN41 01958 1.png 1](https://repairalltv.com/wp-content/uploads/2020/11/MAIN-BOARD-BN41-01958-1.png-1-300x225.png)
MAIN BOARD BN41-01958
![BN94 06779X](https://repairalltv.com/wp-content/uploads/2020/11/BN94-06779X-300x225.png)
BN94-06779X
![EMMC KLM4G1FE3B B001](https://repairalltv.com/wp-content/uploads/2020/11/EMMC-KLM4G1FE3B-B001-300x225.png)
EMMC KLM4G1FE3B-B001
![ISP PIN INFO READ EMMC.png ESAKT](https://repairalltv.com/wp-content/uploads/2020/11/ISP-PIN-INFO-READ-EMMC.png-ESAKT-300x225.png)
ISP PIN INFO READ EMMC
![ISP PIN READ EMMC TNM 5000](https://repairalltv.com/wp-content/uploads/2020/10/pin-isp-wire-EMMC-read-all-300x146.png)
ISP PIN READ EMMC TNM5000
![ISP CABLE EMMC PIN](https://repairalltv.com/wp-content/uploads/2020/10/ISP-CABLE-EMMC-PIN-300x150.png)
Programmer ISP Cable EMMC pin
ISP PIN 1 CMD
ISP PIN 3 RST-n(Reset) (mandatory)
ISP PIN 5 CLK (Clock)
ISP PIN 6 DAT0
ISP PIN 8, 10 VSS (GND)
Vcc of Chip Must be ON. Reset is needed only when circuit reset is not working.
Note 1: After Selecting EMMC, programmer will be switched to Report view.
because EMMC files are too large and can’t be viewed by hex editor.
you can switch back to hex editor by unmarking the report button.
Note 2: Load & Save buttons has no use in EMMC nand. you must select filename
after pressing read or program buttons. File will be saved automatically with
Boot1, Boot2, RPMB, EXT_CSD extensions for different parts of the chip.
Note 3: After pressing read or Program, EMMC size and type will automatically
be Detected.
Note 4: Use Config Window for selecting Different Parts of the chip for read and write.
Also, chip Size and name is read from the chip and can be viewed in this window.
Note 5: Erase is for total chip erase. before Programming Each part, Programmer
will erase it automatically, so no need for chip erase before program.
Note 6: Only First 192 byte of EXT_CSD is writable by users and Some of these bytes
are read-only and some parts are one-time programable so if you write over these areas,
you get Write error.
Note 7: in most cases, Reset Pin is not necessary, Power on/off the device for reset
![read emmc programmer TNM5000](https://repairalltv.com/wp-content/uploads/2020/11/read-emmc-programmer-TNM5000-300x146.png)
![INFO ISP READ EMMC PIN PGORAMMER RT809H](https://repairalltv.com/wp-content/uploads/2020/11/INFO-ISP-READ-EMMC-PIN-PGORAMMER-RT809H-300x225.png)
INFO ISP READ EMMC PIN PGORAMMER RT809H
![BOARD SCREEN LSF320AN01 A05..](https://repairalltv.com/wp-content/uploads/2020/11/BOARD-SCREEN-LSF320AN01-A05..-300x225.png)
BOARD SCREEN LSF320AN01-A05
![MODEL PANEL CY HF320AGLV1H](https://repairalltv.com/wp-content/uploads/2020/11/MODEL-PANEL-CY-HF320AGLV1H-300x225.png)
MODEL PANEL CY-HF320AGLV1H
![W25Q40 AT24C512 EEPROM](https://repairalltv.com/wp-content/uploads/2020/11/W25Q40-AT24C512-EEPROM-300x225.png)