SAMSUNG ue55nu7170u bn41-02635 emmc Firmware download
tv model UE55NU7170U
MAIN BOARD POWER BOARD
samsung UE55NU7170U BN41-02635 EMMC Firmware download
ISP READ PROGRAMMEER TNM5000
ISP PIN READ EMMC TNM 5000
Programmer ISP Cable EMMC pin
ISP PIN 1 CMD
ISP PIN 3 RST-n(Reset) (mandatory)
ISP PIN 5 CLK (Clock)
ISP PIN 6 DAT0
ISP PIN 8, 10 VSS (GND)
Vcc of Chip Must be ON. Reset is needed only when circuit reset is not working
Note 1: After Selecting EMMC, programmer will be switched to Report view.
because EMMC files are too large and can’t be viewed by hex editor.
you can switch back to hex editor by unmarking the report button
Note 2: Load & Save buttons has no use in EMMC nand. you must select filename
after pressing read or program buttons. File will be saved automatically with
Boot1, Boot2, RPMB, EXT_CSD extensions for different parts of the chip
Note 3: After pressing read or Program, EMMC size and type will automatically
Note 4: Use Config Window for selecting Different Parts of the chip for read and write.
Also, chip Size and name is read from the chip and can be viewed in this window
Note 5: Erase is for total chip erase. before Programming Each part, Programmer
will erase it automatically, so no need for chip erase before program
Note 6: Only First 192 byte of EXT_CSD is writable by users and Some of these bytes
are read-only and some parts are one-time programable so if you write over these areas,
you get Write error
Note 7: in most cases, Reset Pin is not necessary, Power on/off the device for reset.
ISP READ PROGRAMMER RT 809H
MODEL PANEL CY-NN055HGLV2H
tv is working